A Lenze variable frequency drive controls the speed and torque of an AC motor by adjusting output frequency and voltage. Lenze builds several drive families, and each one fits a different set of jobs. The right model comes down to five factors: motor power, supply voltage, mounting location, control performance, and network requirements.
This guide breaks down the current Lenze VFD lineup and shows you how to match a drive to your application.
What Lenze VFD Series Are Available?
Lenze’s core inverter lineup includes the i500 series (i510 and i550) and the SMVector series. Here is how they compare.
| Series | Mounting | Power Range | Typical Applications |
| i510 Cabinet | Control panel | 0.25 to 15 kW (0.33 to 20 hp) | Pumps, fans, conveyors, basic machine tasks |
| i550 Cabinet | Control panel | 0.25 to 132 kW (0.33 to 175 hp) | Complex machines, networked lines, safety-rated systems |
| i550 Protec | Wall or motor mount | 0.37 to 75 kW (0.5 to 100 hp) | Decentralized drives installed near the motor |
| i550 Motec | Motor mount | 0.37 to 45 kW (0.5 to 60 hp) | Distributed conveyor and material handling systems |
| SMVector NEMA 1 | Control panel | 0.33 to 60 hp | Packaging, conveying, positive displacement pumps, HVAC |
| SMVector NEMA 4X | Wall mount | Up to 30 hp | Food processing, washdown areas, harsh environments |
How to Choose the Right Lenze Variable Frequency Drive
1. Start With Motor Power and Supply Voltage
Pull the motor nameplate data first. You need horsepower, full load amps, and voltage. Size the drive to the motor’s full load current, and add margin for applications with high starting torque or frequent overloads, such as loaded conveyors and hoists.
Confirm your supply voltage next. The SMVector covers 120V single phase up to 600V three phase. The i500 series supports 120V, 240V, and 480V supplies. If you only have single phase power on site, check the single phase input limits for the model you’re considering, since they top out at lower horsepower.
2. Decide Where the Drive Will Mount
Location drives enclosure choice. Panel-mounted drives like the i510 Cabinet, i550 Cabinet, and SMVector NEMA 1 install inside a control cabinet. The i500 cabinet drives are slim, measuring 60 mm wide up to 4 kW, and support zero-clearance side-by-side mounting. That saves real panel space on multi-drive builds.
For drives mounted out on the floor, look at the i550 Protec, i550 Motec, or SMVector NEMA 4X. Decentralized mounting shortens motor cable runs and frees up cabinet space. The SMVector NEMA 4X is rated for washdown duty, which makes it a strong fit for food and beverage plants where equipment gets hosed down daily.
3. Match the Control Mode to the Load
Variable torque loads like centrifugal pumps and fans run well on basic V/Hz control. Constant torque loads like conveyors, mixers, and extruders need stronger low-speed torque.
The SMVector offers four control modes: V/Hz, enhanced V/Hz, vector speed control with a 60:1 speed range, and vector torque control. The i550 adds sensorless control for synchronous motors and servo control with encoder feedback on models up to 22 kW. If your application requires precise positioning or tight speed regulation, pair the i550 with an industrial encoder for closed-loop control.
4. Plan for Network Communication
Check what protocol your PLC uses before you order. The i510 ships in two versions: Basic I/O, or Basic I/O with CANopen and Modbus RTU. The i500 platform also supports optional modules for EtherNet/IP, PROFINET, EtherCAT, Modbus TCP, PROFIBUS, and POWERLINK.
The i550’s modular design separates the power unit, control unit, and safety unit. You can change the communication module later without replacing the whole drive.
5. Account for Safety and Commissioning
If your machine requires functional safety, the i550 is available with Safe Torque Off (STO) rated to SIL 3 and Performance Level e. STO removes torque from the motor without cutting main power, which simplifies safety circuit design.
Commissioning speed matters on every install. The i500 series supports WLAN-based setup and diagnostics through a smartphone app. The SMVector uses a removable Electronic Programming Module (EPM) that stores drive parameters. Swap the EPM into a replacement drive and the new unit is configured in seconds.
Verify the Load Before You Order
Undersized drives trip on overcurrent. Oversized drives cost more and can run less efficiently. Measuring actual load conditions removes the guesswork.
A power logger or power quality analyzer records voltage, current, power factor, and harmonics over days or weeks of real operation. That data shows peak demand, duty cycles, and existing power quality issues before a new drive goes in. After installation, the same test confirms the drive is performing as expected and flags harmonic distortion that may call for a line reactor or filter.
Lakeland Engineering offers electrical test equipment rentals so you can collect this data without buying a meter you’ll use once a year.
Frequently Asked Questions
What is the difference between the Lenze i510 and i550?
The i510 is a single-piece drive covering 0.25 to 15 kW for standard applications. The i550 is modular, covers 0.25 to 132 kW, and adds options like Safe Torque Off and expanded control modes.
Which Lenze VFD works best for washdown environments?
The SMVector NEMA 4X (IP65) is built for washdown duty and is available up to 30 hp.
Can a Lenze VFD run a three phase motor from single phase power?
Yes. Select Lenze models accept single phase input and output three phase power to the motor. Horsepower is limited on single phase input, so confirm the rating for your motor size.
What applications are Lenze drives designed for?
Lenze drives are used for pumps, fans, conveyors, traction, winding, forming, tool, and hoist drives across manufacturing, packaging, food processing, and HVAC.
Get the Right Lenze Drive From Lakeland Engineering
Lakeland Engineering is a trusted Lenze distributor stocking variable frequency drives from 1/4 HP to 2750 HP across leading brands. Our engineering team helps you size drives, select the right enclosure and communication options, and source replacement units fast.
Talk to Lakeland for product recommendations, availability, and quotes.