Services Archives

15 03, 2018

Don’t Let Mechanical Issues Delay your Seed Treating Processes

Emily Wheeler2018-11-19T17:26:22+00:00March 15th, 2018|News, Services|

Industry Spotlight on Agriculture In the Midwest, seed treating is a short but incredibly important season in the agricultural industry. From mechanical issues with equipment start up to conveyor or scale failure, Lakeland Engineering understands how valuable facility uptime is during this critical season. With the strict time constraints placed on seed treaters, it’s important to prepare for possible equipment malfunctions to avoid any downtime. Let an experienced, local Lakeland Engineering account representative assist with [...]

13 03, 2018

What Type of Cooling Unit Does Your Enclosure and Application Area Require?

Emily Wheeler2018-11-19T17:30:36+00:00March 13th, 2018|New Products, Services|

Pfannenberg Air to Air Heat Exchangers for Energy-Efficient, Hazardous-Location Approved Enclosure Cooling Pfannenberg’s Filterfans® have evolved into the trusted name for forced convective cooling to circulate and cool the air in your enclosures. Cooling with ambient air, or air outside of the enclosure, is the most economical and energy efficient type of cooling. When are Cooling Units Necessary? If cooling cannot be accomplished by the outside air If the temperature required inside the electrical [...]

13 09, 2017

How many Switches & Valves are in Your Facility?

Emily Wheeler2017-09-13T19:55:46+00:00September 13th, 2017|Informational, Services|

Lakeland Engineering Equipment Co. is proud to offer our customers the complete line of ASCO solenoid valves and Honeywell MicroSwitch products to keep your operations running smoothly. Did you know that Lakeland Engineering can provide a complete survey on the types and quantities of valves and switches in your facility? The valve and switch survey information allows you to streamline ordering processes and consolidate suppliers. Lakeland is ready to inform and adjust our inventory to [...]

19 07, 2017

What Type of Sensor Do I Need?

Emily Wheeler2017-07-19T17:57:28+00:00July 19th, 2017|Informational, Services|

With all of the different types of sensors available today, it can be difficult to know for sure which type of sensor will fit your application the best. In the world of sensing, there is often not one right answer. This can open the door to a variety of different solutions that will work with your project, but with a few application considerations, you can choose a sensor that will be accurate, reliable and possibly [...]

31 03, 2017

How Industrial Security Cameras Can Keep You FSMA-Compliant

Emily Wheeler2018-11-21T12:41:05+00:00March 31st, 2017|Cameras, New Products, News, Services|

If you’re a company that processes or makes food, then you’re surely familiar with the FDA’s Food Safety Modernization Act (FSMA). Industrial security cameras can help your organization be compliant with this act. All food-related facilities covered by the act must prepare and implement a food defense plan that identifies vulnerabilities, mitigation strategies, and procedures for food defense monitoring, corrective actions and verification. One huge element of this plan is the implementation of preventative controls [...]

22 03, 2017

Solutions for Water and Wastewater Facilities

Emily Wheeler2017-03-22T14:53:12+00:00March 22nd, 2017|New Products, Services|

Lakeland and PMC provide one of the most comprehensive selections of electrical components, system solutions, and test and measurement equipment in the Midwest. We specialize in providing tailored solutions for water and wastewater facilities, in addition to the services and support to calibrate, install and maintain your equipment. As a result, providing the products and services that can help your plant run more efficiently, extend facility life, and improve water quality. Lakeland and PMC also [...]

6 03, 2017

Choosing the Right Motor Protection and Control Solution

Emily Wheeler2017-03-06T18:59:25+00:00March 6th, 2017|News, Safety, Services|

Choosing the right motor protection and control solution for your application can be a complicated task. That applies to whether you’re considering using an across-the-line starter to simply connect and disconnect full power to a motor, a soft starter to smoothly ramp up a motor, or a variable frequency drive (VFD) to adjust motor speed. As these motor protection and control components become more technologically advanced and competitively priced, it’s increasingly important to know more [...]

2 03, 2017

Energy Savings = Free Money!

Emily Wheeler2017-03-02T16:51:07+00:00March 2nd, 2017|News, Services|

At a time when most companies are struggling for ways to cut costs and find inefficiencies, there are a few simple investments you can make that contribute to money and energy savings. Thanks to DSIRE, a website that lists by state all of the available government and energy company incentives, you can easily search for rebate programs that can save you tons of money. Your business may qualify for a slew of tax credits and [...]

27 02, 2017

Product Showcase: MTE Harmonic Mitigation Products

Emily Wheeler2018-11-21T12:41:44+00:00February 27th, 2017|New Products, News, Services|

MTE Corporation is a supplier of power quality solutions designed to improve the reliability of power electronic systems and variable frequency drives. MTE designs and manufactures line/load reactors, Matrix AP Passive Harmonic Filters, and dV Sentry and SineWave Guardian motor protection filters that provide power quality solutions in a broad range of applications. A power system’s ability to perform at optimal levels is compromised when harmonic distortion enters the system. It creates inefficiencies in equipment [...]

How Can We Help?

Your Information

Products Requested

How Can We Help?

Request A Quote

Your Information

Products Requested